G06.24 Software Installation and Upgrade Guide

Resuming Normal Operations
G06.24 Software Installation and Upgrade Guide—528593-005
12-15
Configure the Remote Duplicate Database Facility
(RDF)
To ensure system configuration integrity, always:
1. Save the system configuration after SMF configuration changes are made.
2. Reload the system from the current system configuration file or the latest version
with SMF changes.
If remote access to files supported by SMF is needed, the remote system must be
running one of these RVUs:
•
Any G-series RVU
•
D43.02 or later D4n.nn D-series RVUs
•
D35.00, plus an additional set of D3n.nn SPRs, including:
°
T9055ACR
°
T9194ABQ
°
T9196ACE
°
T9197ABO
See the softdoc T8472ACK or later for interoperability considerations, including
information on SMF configuration.
Configure the Remote Duplicate Database Facility (RDF)
The AUDITTRAILBUFFER parameter is a modifier to DP2, which improves the
performance of RDF. Ensure that an appropriate value is specified for the
AUDITTRAILBUFFER modifier for the master audit-trail disk process. The
AUDITTRAILBUFFER parameter allows you to specify how many megabytes of buffer
space to allocate for the audit-trail buffers. See the SCF Reference Manual for the
Storage Subsystem for information on configuring the buffer size.
Upgrade the WAN Manager (T8365), (Optional)
The version of WAN Manager (WANMGR) delivered in the G06.07 and later RVUs
removes the limitation of configuring 100 SWAN adapters. Starting with the G06.07
RVU, the number of adapters you can configure is determined by the amount of
memory available to the WAN manager. See the T8365 softdoc for information on the
default WANMGR startup configuration and how to use SCF to increase it.
Before updating the SWAN or SWAN 2 firmware (Appendix C, Updating SWAN
Concentrator CLIP Firmware), first configure the WAN Manager.