G06.25 Software Installation and Upgrade Guide

Updating Service Processor (SP) Firmware
G06.25 Software Installation and Upgrade Guide—529430-001
7-17
Updating Firmware Using the TSM Low-Level Link
Application
Updating Firmware Using the TSM Low-Level Link Application
If you are unable to use the TSM Service Application, you can still update each SP by
using the TSM Low-Level Link Application, if you have downloaded the firmware file
spntcde9, as described under Download the SP Firmware File to the System
Console on page 7-6. This scenario might occur if you are unable to log on to the TSM
Service Application because the NonStop operating system is not running on your
system.
1. If necessary, log on to the TSM Low-Level Link Application and perform a System
Discovery.
2. On the toolbar, click SP Actions, or select Display>SP Actions.
The Service Processor Actions dialog box appears.
3. From the Available Actions list, select Firmware Update.
The Firmware File box appears.
4. Select the SP to be updated from the Service Processors (SPs) list.
5. Click Perform action.
VST660.vsd
Firmware File box appears when the
Firmware Update action is selected