G06.25 Software Installation and Upgrade Guide

G06.25 Software Installation and Upgrade Guide—529430-001
B-1
B
Installing the Latest DSM/SCM SPRs
and Client Software
Before You Begin Installing DSM/SCM and
Client SPRs
Table B-1 on page B-2 describes all of the DSM/SCM versions introduced on
G-series RVUs. Before installing and configuring DSM/SCM, always review the
T6031D46 softdoc.
Note.
•
If you want DSM/SCM to manage OSS files, you must install both the D46 DSM/SCM SPR
and the client version before you receive the SUT. You can install the D46 client version
(T6031D46^ABK) either before or after installing the T6031D46^ABK SPR. However, this
appendix describes installing the T6031D46^ABK SPR first on the server side and then on
the client side.
•
If you are on a D31 product version of DSM/SCM and you do not need to manage new
OSS files, HP recommends that you always upgrade to the newest D46 DSM/SCM SPR
and client before installing the G06.25 RVU.
•
The latest DSM/SCM client version (T6031D46^ABK) is available only on the SUT unless
you have ordered new system consoles.
•
If you fall back from the T6031D46^ABK version, you must run the FALLBACK macro
whether or not you have created Safeguard aliases or on a post G06.19 RVU.