G06.26 Software Installation and Upgrade Guide

Installing the G06.26 RVU
G06.26 Software Installation and Upgrade Guide—529886-002
5-5
Receive New Software Into the Archive
5. In the Receive Options group box, do the following, depending on your system
environment:
°
Select Receive only changed files if you do not want to manage OSS files.
°
Select Receive all files if you want to manage OSS files. If you select this
option, the apply might take over an hour if you are upgrading from a pre-
G06.18 RVU.
6. Under Software name, select Provided by planner and enter a name for the RVU.
7. Under Options, click Input source.
The Request Source Options dialog box appears.
8. Select Tape drive.
9. From the list, select the tape drive that contains the SUT, and click OK.
The Request Source Options dialog box closes.
10. (Optional) In the Options group box of the Receive Software Request dialog box,
click Scheduling.
The Request Scheduling Options dialog box appears. Make the appropriate
selections and click OK.
The Request Scheduling Options dialog box closes.
11. In the Receive Software Request dialog box, click OK.
A Status window appears and is updated automatically at regular intervals.
VST553.vsd