G06.26 Software Installation and Upgrade Guide

Installing the Latest DSM/SCM SPRs and Client
Software
G06.26 Software Installation and Upgrade Guide—529886-002
B-7
Copy (RESTORE) the D46 DSM/SCM Product
Version and SWID (Optional) to Disk
Copy (RESTORE) the D46 DSM/SCM Product
Version and SWID (Optional) to Disk
To copy the D46 product version of DSM/SCM and the SWID product (optional,
depending on your current RVU) from the G06.26 RVU to disk, at a TACL prompt,
enter the RESTORE command:
>RESTORE/OUT $S.#nnn.DSM/$tape, ($*.R6030D31.*,$*.R6031D46.*,$*.R9298D40.*),
VOL $DSMSCM, LISTALL
where nnn is the RVU number (G06) and where $tape is the name of the tape drive
containing the G06.26 RVU.
If you are already on a G06.20 RVU, enter:
>RESTORE/OUT $S.#nnn.DSM/$tape, ($*.R6030D31.*,$*.R6031D46.*), VOL $DSMSCM,
LISTALL
If you are currently on a G06.08 RVU or later and all files are restored without error,
you might see a display for DSM/SCM similar to:
$TDSV.R6030D31
A0CINFO 963 3072 14Jul2000 9:59 255,0 AOAO K 212 1
T6030D31 101 40888 14Jul2000 9:59 255,0 AOAO
$TDSV.R6031D46
A0CINFO 963 27648 14Oct2002 15:38 255,0 AOAO K 212 1
CBEXE 100 3303424 28Jul2004 19:54 255,0 AOAO
CLEANOSS 101 1576 11Jun2002 10:43 255,0 AOAO
CNFGC 101 81740 4Oct2002 11:52 255,0 AOAO
CNFGCOB 101 81752 4Oct2002 11:52 255,0 AOAO
CNFGINFO 100 75776 8Oct2002 19:54 255,0 AOAO
.
.
Receive the D46 SPRs for DSM/SCM
1. Start TMF and DSM/SCM if they are not already running:
> TMFCOM START TMF
> VOLUME $dsmscm_vol.ZDSMSCM
> RUN STARTSCM
2. Start>Programs>Dsm_scm>DSMSCM to log on to the DSM/SCM Planner
Interface.
3. In the Software in Archive dialog box, select Receive software.
DSM/SCM displays the Receive Software Request dialog box.
4. Under Software name, select Provided by planner and enter a name for the D46
DSM/SCM product version and SWID up to17 characters. For example: