G06.26 Software Installation and Upgrade Guide

Installing the Latest DSM/SCM SPRs and Client
Software
G06.26 Software Installation and Upgrade Guide—529886-002
B-17
Verify That SWID Is Installed
This example shows the G06.26 D46 product version of DSM/SCM after DSM/SCM
has been activated. (Bold lettering is used to show the vproc command and the latest
version):
$DSMSCM.ZDSMSCM.CBEXE
Binder timestamp: 10FEB2005 05:36:27
Version procedure: S7032D20^27FEB04^SWARCCP^AAH
Version procedure: T6031D46_27FEB2005_10FEB2005ABN
Target CPU: UNSPECIFIED
AXCEL timestamp: 10FEB2005 05:36:53
VPROC - T9617G03 - (07 AUG 2003) SYSTEM \ZEUS Date 18 FEB 2005, 15:54:30
Copyright 2003 Hewlett-Packard Development Company, L.P.
$DSMSCM.ZDSMSCM.TAEXE
Binder timestamp: 10FEB2005 03:46:29
Version procedure: S7032D20^27FEB04^SWARCCP^AAH
Version procedure: T6031D46_27FEB2005_10FEB2005ABN
Target CPU: UNSPECIFIED
AXCEL timestamp: 10FEB2005 03:47:11
\ZEUS $DSMSCM.ZDSMSCM 5>
Verify That SWID Is Installed
If the AAI SPR is already installed on your SYSnn, you do not need to restore the latest
SWID SPR from tape and activate it.
This is an example of a previous SWID SPR (for G06.20 and G06.21 RVU):
$system.system.swid
Binder timestamp: 24JAN2003 13:51:31
Version procedure: T9298D40_29NOV2002_24JAN2003AAJ
Target CPU: TNS, TNS/R
The latest SWID SPR for G06.26:
$system.system.swid
Binder timestamp: 15SEP2004 20:58:48
Version procedure: T9298D40_12JUL2004_16JUL2004AAL
Target CPU: TNS, TNS/R