G06.26 Software Installation and Upgrade Guide

Installing the Latest DSM/SCM SPRs and Client

Software

G06.26 Software Installation and Upgrade Guide—529886-002

B-19

Alert (DSM/SCM T6031D46^ABN Client)

Do not attempt to use DSM/SCM T6031D46^ABN client software until you have first

installed the T6031D46 PVU on your host system. See Table 3-1, DSM/SCM Client

and Server Compatibility, on page 3-5.

Limited DSM/SCM operation is available if you run T6031D46^ABN client software with

pre-AAO server software. HP recommends that both the DSM/SCM product version

and DSM/SCM client be at the same version level at all times.

Determine Your DSM/SCM Client Software Version

To determine which version of DSM/SCM client software is installed, start the

DSM/SCM Planner Interface. Before prompting you to log on, the About DSM/SCM

window briefly displays version information. See Determine the Product Version of

DSM/SCM on the Host System on page B-5.

Determine the Current IP Address and Port Number

When you install DSM/SCM client software, you are prompted to enter the IP address

of the host system with which DSM/SCM communicates and the IP port number for the

DSM/SCM Winsock service.

If the DSM/SCM client software on your system console is configured to communicate

with a host system, determine the configured IP address and port number:

1. Start Windows Explorer. Open My Computer if not already open.

2. Double-click the hard drive icon to display its contents.

3. Open the DsmScm folder to display its contents.

4. In the Contents pane, double-click dsmscm.ini.

Notepad opens the DSM/SCM initialization file. For example:

VST005.vsd

IP Address

IP Port Number