G06.26 Software Installation and Upgrade Guide

Overview of Installing G06.26
G06.26 Software Installation and Upgrade Guide—529886-002
1-13
Updating Firmware
Table 1-5 lists the product number and updateable firmware information for the IOAM
Maintenance Entity and FCSA. Check with your HP service provider for more
information.
Updating Firmware Before System Load
Use the TSM Service Application to update SP firmware and processor boot code
before you perform a system load with the new RVU.
If OSM is already installed and configured on your current RVU, including the client,
use the OSM Service Connection Multi-Resource Actions dialog box to update
firmware.
Updating Firmware After System Load
Use the TSM Service Application or the OSM Service Connection (if OSM is already
installed and configured) to update remaining firmware, such as the SWAN
concentrator as necessary, after you perform a system load with the new RVU.
If you are using the 6780 ServerNet Switch, you must use the OSM Service
Connection to update firmware. The same is true for updating firmware for the IOAM
Maintenance Entity.
Table 1-5. G06.26 IOAM Firmware
Product
Number Description
Host
CRU/FRU
Disk
File
Name
Default
Location Mgmt Tool
Related
Information
T2805AAB* Maintenance
Entity firmware
(ME Firmware)
IOAM M2805 SYSnn
subvolume
OSM SC Modular I/O
Installation
and
Configuration
Guide
T0630G06
^AAC*
(8840) Fibre
Channel
ServerNet
adapter (FCSA)
FCSA I0630 SYSnn
subvolume
OSM SC Fibre
Channel
ServerNet
Adapter
(FCSA)
Installation
and Support
Guide
*
Only HP service providers are authorized to update the firmware. See Scout for the latest SPRs.
Caution. Before upgrading boot millicode using the online update function to T7892ABD, you
must have the G06.24 or later version of either the TSM server (T7945ABN) or all OSM server-
based SPRs (along with their prerequisites) configured and running. Otherwise, a processor
halt will result.