G06.26 Software Installation and Upgrade Guide

Overview of Installing G06.26
G06.26 Software Installation and Upgrade Guide—529886-002
1-24
4619 Disk Drives
•
System Configuration Database on page 1-40
•
SWID (T9298D40^AAL) (G06.20) on page 1-38
•
NonStop TCP/IPv6 (G06.20 through G06.26) on page 1-40
•
TMF (G06.23, G06.24, G06.25, and G06.26) on page 1-41
•
TNOS Server and TNOS Utility (G06.17) on page 1-42
•
Visual Inspect (G06.20) on page 1-43
•
WAN Wizard Pro (G06.21 through G06.26) on page 1-43
•
X25AM on page 1-43
4619 Disk Drives
You can install the 4619 disk drive in the same system enclosure as disk drives of
different model numbers. However, disk drives in a mirrored volume must always be
the same model number, even if they are of the same capacity. Because of the
difference in rotational speed between the 4618 (10K rpm) and 4619 (15K rpm) disk
drives, place the 4618 and 4619 disk drives in a mirrored volume only during an online
disk replacement procedure.
6780 ServerNet Switch (G06.21)
For information on required software, installation, migration, and fallback procedures,
see the ServerNet 6780 Planning and Installation Guide.
Backup and Restore 2 (BR2) (G06.23, G06.24, G06.25, G06.26)
Backup and Restore 2.0 supports OSS and SQL/MX files and consists of these major
components:
•
Backup and Restore Command Interface (BRCOM) (T2721)
•
Data Service (T2750)
•
Data Management Application (DMA) (T2749)
•
Tape Service (T2722)
For more information on these SPRs, see the Interactive Upgrade Guide.
These Backup and Restore 2.0 SPRs that support OSS files are included on the
G06.26 SUT to support OSS files and SQL/MX objects:
•
T2721AAC (BR 2 BRCOM)
•
T2722AAC (BR 2 Tape Services)
•
T2749AAC (BR 2 DMA & Cmd Stream Proc)
•
T2750AAC (BR 2 Data Services)
To back up and restore SQL/MX tables and OSS files, see the Backup and Restore 2.0
Manual.