G06.26 Software Installation and Upgrade Guide

Overview of Installing G06.26
G06.26 Software Installation and Upgrade Guide—529886-002
1-34
Processor Multifunction (PMF) CRUs (G06.08
through G06.26)
Processor Multifunction (PMF) CRUs (G06.08 through G06.26)
If you upgrade to NonStop PMF CRUs while installing G06.26 and have to return to an
RVU prior to G06.26, review the Interactive Upgrade Guide, the NonStop S-Series
Central Office Server Installation and Service Guide, and Table 1-9 to see if you have
to remove PMF CRUs.
Table 1-9. Upgrading to NonStop S-Series CRUs and Falling Back (page 1 of 2)
NonStop PMF CRU
Introduced in
this RVU Action
S7400 G06.08 S7400 PMF CRUs must be removed; these
PMF CRUs are supported in G06.08 and later
RVUs only.
S74000 G06.08 S74000 PMF CRUs must be removed; these
PMF CRUs are supported in G06.08 and later
RVUs only.
S7600 G06.17 S7600 PMF CRUs must be removed. These
PMF CRUs are supported for G06.17 and
later RVUs only.
S7600SE G06.25 S7600SE PMF CRUs must be removed.
These PMF CRUs are supported for G06.17
and later RVUs only.
S76000 G06.16 S76000 PMF CRUs must be removed. These
PMF CRUs are supported for G06.16 and
later RVUs only.
S76000SE G06.25 S76000SE PMF CRUs must be removed.
These PMF CRUs are supported for G06.16
and later RVUs only.
S86000 G06.16 S86000 PMF CRUs must be removed. These
PMF CRUs are supported for G06.16 and
later RVUs only.
S86000SE G06.25 S86000SE PMF CRUs must be removed.
These PMF CRUs are supported for G06.16
and later RVUs only.
S7800 G06.23 S7800 CRUs must be removed. These PMF
CRUs are supported for G06.16 and later
RVUs only. See the Interactive Upgrade Guide
for details.
S7800SE G06.25 S7800SE CRUs must be removed. These
PMF CRUs are supported for G06.16 and
later RVUs only. See the Interactive Upgrade
Guide for details.