G06.26 Software Installation and Upgrade Guide

Installing SPRs Before Upgrading to the G06.26

RVU

G06.26 Software Installation and Upgrade Guide—529886-002

3-10

TSM Server and Client Compatibility SPRs

The newest TSM server SPR is T7945ABR, and the TSM client version 2004A

(T8154G07) is compatible with T7945AAG through T7945ABR. You should always

install the latest TSM SPR and corresponding client.

If you decide to use TSM to install the RVU and use TSM to monitor your system, HP

recommends that you upgrade your system console to TSM client software Version

2004A (T8154G07^ABH) before you install the G06.26 RVU. Doing so enables you to

use the latest TSM client software for G06.26 RVU upgrade tasks. It also enables you

to continue using TSM client software Version 2004A on your system console even if

you have to fall back to an earlier RVU.

Follow the installation instructions outlined in the softdoc, including preinstallation and

post-installation steps.

Determining the Current Version of TSM Server Software

1. At the TACL prompt, enter:

VPROC $SYSTEM.SYSnn.SRM

2. Read the last line of the VPROC information.

The TSM PVU for G06.26 is T7945ABR. This example shows that T7945ABL (TSM

Bind) has been installed on the system:

Note. Starting with the G06.24 RVU, the CSSI Web snapshot is no longer provided on the

installer CD, but the CSSI Web site can be accessed from the NonStop Technical Library

(NTL).