G06.27 Release Version Update Compendium

Installation and Configuration Products
G06.27 Release Version Update Compendium—540430-001
5-2
Firmware Updates
•
If you performed a backout from G06.27 and backed out the migration from
T6031G02 to a pre-T6031D46 PVU, you must run the FALLBACK macro. Both
Safeguard and OSS management information from the DSM/SCM databases is
removed.
Firmware Updates
Migration
To connect an I/O adapter module (IOAM) enclosure to a NonStop S-series system in
a group other than group 01, you must ensure that:
•
The Maintenance Entity firmware version on the ServerNet switch board is
T2805AAD.
•
The SP firmware version on the NonStop S-series system is T1089ABR.
If you need to update the firmware to meet these levels, you must do so before moving
the IOAM enclosure to a group other than 01.
If the IOAM enclosure has not been connected to the NonStop S-series system
enclosure yet, connect a system console to the IOAM enclosure and use the OSM
Low-Level Link to update the firmware and perform a module preparation (using the
Configure Module dialog box) before connecting it to the NonStop S-series system.
VPROC
VPROC now supports TNS object files (code 100 files) on the NonStop S-series
systems that have an OCA region.