G06.27 Software Installation and Upgrade Guide

Installing the G06.27 RVU
G06.27 Software Installation and Upgrade Guide—540067-001
5-12
Create a New Software Revision
in the previous configuration. (These products are removed from the system by
DSM/SCM during the Build/Apply of the new configuration.)
An example of a product version mismatch might occur when T9225D46 (TNS/R
C++ Compiler) is installed using DSM/SCM. If you are not currently running
TT9225D46, the Planner Interface displays a "Version Mismatch" message to
indicate that the version of this SPR is different from the version of the base
component. Click Continue.
Note also that for OSS files, the Activation Package contains installation
instructions for the pax files for those OSS products that contain A7CINFO files in
their distributed subvolumes. DSM/SCM installs only these pax (archive) files on
the OSS file system. Other files are delivered to the target in the ZOSSUTL
subvolume, but are not installed on the OSS file system. You might receive a
warning that certain OSS products (such as T6035, T5893) are not DSM/SCM
enabled. If this is the case, install them using PINSTALL/COPYOSS. See the
appropriate OSS manuals for using PINSTALL and COPYOSS.
The Non SUT Products dialog box might appear:
The dialog box lists non-SUT products installed on the previous SYS nn that are
not available on the new configuration.
8. You can retain non-SUT or third-party products from your current configuration into
the new revision.
•
To include one or more products in the configuration to be built, select the
products and click Continue.
•
To include all products, click Select All and click Continue.
The New software revision list now displays the new RVU level.