G06.27 Software Installation and Upgrade Guide

Installing the Latest DSM/SCM SPRs and Client
Software
G06.27 Software Installation and Upgrade Guide—540067-001
B-3
Before You Begin Installing the Software
Identification (SWID) and DSM/SCM SPRs
Before You Begin Installing the Software
Identification (SWID) and DSM/SCM SPRs
Besides upgrading the T6031 client and server SPRs for DSM/SCM, you must also
upgrade the Software Identification (SWID) (T9298G02) product at the same time to
avoid a problem with mismatched files. (SWID is a utility used by DSM/SCM to
determine if a file has changed by a method called fingerprinting.) If an existing file has
a different fingerprint from a newer file, the existing file is replaced with the newer
version.
Alerts
•
You must install the new SWID SPR (T9298G02) introduced in the G06.27 RVU
when you install the DSM/SCM T6031G02 SPR. You must install the SWID
product at the same time to avert a problem of mismatched fingerprinted files.
•
Determine the Product Version of DSM/SCM on the Host System and Determine
the Product Version of DSM/SCM on the Client.
•
Save the current configuration database (see Save the Current Configuration File
(CONFxxyy) on page 4-1).
•
Keep the startup TACL windows, the EMS Event Stream window, and the
DSM/SCM client interface windows open whenever you are performing a
Build/Apply. Otherwise, Build/Apply errors will result.
•
If you receive an error indication in the Request Status window, you might have to
reinitiate the Build/Apply. See the DSM/SCM Messages Manual to learn the nature
and severity of the problem.
Determine the Product Version of DSM/SCM on the Host System
To determine which product version of DSM/SCM is currently installed on your system,
use the VPROC command to determine the product version of TAEXE (Apply product
of DSM/SCM) and CBEXE (Build product of DSM/SCM).
At a TACL prompt, enter:
> volume $dsmscm_vol.ZDSMSCM
> vproc taexe
> vproc cbexe
If your VPROC commands do not display the following VPROC versions, install the
latest DSM/SCM product version as described in Copy (RESTORE) the T6031G02
DSM/SCM Product Version and SWID to Disk on page B-5: