G06.27 Software Installation and Upgrade Guide

Installing the Latest DSM/SCM SPRs and Client
Software
G06.27 Software Installation and Upgrade Guide—540067-001
B-13
Verify That the Newest Product Version of
DSM/SCM Is Installed
2. If necessary, press Enter to have STARTSCM run the IPM6031 TACL macro
automatically. This step takes several minutes.
Verify That the Newest Product Version of DSM/SCM Is Installed
To verify that the latest product version of DSM/SCM is currently installed on your
system, use the VPROC command to display the product version of TAEXE (Apply
product of DSM/SCM) and CBEXE (Build product of DSM/SCM). At a TACL prompt,
enter:
> volume $dsmscm_vol.ZDSMSCM
> vproc taexe
> vproc cbexe
This example shows the T6031G02 product version of DSM/SCM after DSM/SCM has
been activated. (Bold lettering is used to show the vproc command and the latest
version):
$DSMSCM.ZDSMSCM.TAEXE
Binder timestamp: 03AUG2005 05:54:43
Version procedure: S7032D20^27FEB04^SWARCCP^AAH
Version procedure: T6031G02_30AUG2005_03AUG05G02
Target CPU: UNSPECIFIED
AXCEL timestamp: 03AUG2005 05:59:09
Privileged code: YES
\bitty $DSMSCM.ZDSMSCM 7> vproc cbexe
VPROC - T9617H01 - (01 OCT 2004) SYSTEM \BITTY Date 25 AUG 2005, 15:14:35
Copyright 2004 Hewlett-Packard Development Company, L.P.
$DSMSCM.ZDSMSCM.CBEXE
Binder timestamp: 03AUG2005 05:35:37
Version procedure: S7032D20^27FEB04^SWARCCP^AAH
Version procedure: T6031G02_30AUG2005_03AUG05G02
Target CPU: UNSPECIFIED
AXCEL timestamp: 03AUG2005 05:39:21
Privileged code: YES
\bitty $DSMSCM.ZDSMSCM 8>
Verify That SWID Is Installed
This is an example of a previous SWID SPR (for G06.20 and G06.21 RVU):
$system.system.swid
Binder timestamp: 24JAN2003 13:51:31
Version procedure: T9298D40_29NOV2002_24JAN2003AAJ
Target CPU: TNS, TNS/R
STARTSCM: A new version of DSM/SCM has been installed and IPM6031 needs to
be run. You can either exit and run IPM6031
manually or continue and IPM6031 will be run for you.
Enter <CR> to continue or BREAK to exit.