G06.27 Software Installation and Upgrade Guide

Installing the Latest DSM/SCM SPRs and Client
Software
G06.27 Software Installation and Upgrade Guide—540067-001
B-15
Determine Your DSM/SCM Client Software Version
Limited DSM/SCM operation is available if you run T6031G02 client software with
pre-AAO server software. HP recommends that both the DSM/SCM product version
and DSM/SCM client be at the same version level at all times.
Determine Your DSM/SCM Client Software Version
To determine which version of DSM/SCM client software is installed, start the
DSM/SCM Planner Interface. Before prompting you to log on, the About DSM/SCM
window briefly displays version information. See Determine the Product Version of
DSM/SCM on the Host System on page B-3.
Determine the Current IP Address and Port Number
When you install DSM/SCM client software, you are prompted to enter the IP address
of the host system with which DSM/SCM communicates and the IP port number for the
DSM/SCM Winsock service.
If the DSM/SCM client software on your system console is configured to communicate
with a host system, determine the configured IP address and port number:
1. Start Windows Explorer. Open My Computer if not already open.
2. Double-click the hard drive icon to display its contents.
3. Open the DsmScm folder to display its contents.
4. In the Contents pane, double-click dsmscm.ini.
Notepad opens the DSM/SCM initialization file. For example:
5. Make a note of the IP address and port number.
6. Close the dsmscm.ini file.
VST005.vsd
IP Address
IP Port Number