G06.27 Software Installation and Upgrade Guide

ManualsBrandsHP ManualsServerHP NonStop G-Series

Overview of Installing G06.27

G06.27 Software Installation and Upgrade Guide—540067-001

1-18

Installing a New RVU

Table 1-6. Tasks and Tools for Installing the G06.27 RVU (page 1 of 2)

To Perform This Task... Use This Tool... Documented in...

1. Install the T6031G02 product

version of DSM/SCM and

fallback/interoperability

SPRs. HP recommends that

you install the T6031G02

SPR on the host and on the

client. You must also install

the SWID product T9298G02

if you are installing the

T6031G02 SPR available on

the SUT.

DSM/SCM Planner

Interface

Section 3, Installing SPRs

Before Upgrading to the

G06.27 RVU

Appendix B, Installing the

Latest DSM/SCM SPRs

and Client Software

2. Save the current

configuration file

(CONFxxyy).

Subsystem Control

Facility (SCF)

Section 4, Preparing to

Upgrade the Server

Software

3. Upgrade the system console

to TSM client software

Version 2005A (if necessary)

or upgrade the OSM

client-component software.

NonStop System Console

Installer

NonStop System Console

Installer Guide

System Console

Requirements on page 1-1

4. Receive new G06.27

software into the DSM/SCM

Archive.

DSM/SCM Planner

Interface

Section 5, Installing the

G06.27 RVU

5. Create a new software

revision.

DSM/SCM Planner

Interface

Section 5, Installing the

G06.27 RVU

6. Build and apply the activation

package.

DSM/SCM Planner

Interface

Section 5, Installing the

G06.27 RVU

7. (Optional) Install and

configure the latest TSM or

OSM server SPRs. Install the

G06.24 or later client and

server SPRs if using the

explicit online boot code

option in OSM or TSM.

DSM/SCM Planner

Interface

See the OSM Migration

Guide or the TSM softdocs.

Section 3, Installing SPRs

Before Upgrading to the

G06.27 RVU