G06.28 Software Installation and Upgrade Guide

Contents

G06.28 Software Installation and Upgrade Guide—541688-001

B. Installing the Latest DSM/SCM SPRs and Client

Software

Install SPRs With DSM/SCM (continued)

Determine the Current SYSnn A-3

Receive the SPR Into the DSM/SCM Archive A-4

Create a New Software Configuration That Includes the SPR A-5

Build the New Revision A-5

Print Operator Instructions From the Target Interface (ZPHITI) A-6

Run ZPHIRNM A-6

If Running INSTALL^TEMPLATES Is Required A-7

If a System Load Is Required A-9

Halt the Processors A-9

Perform a System Load A-10

Reload the Processors (If Necessary) A-11

Start Your Applications and Processes A-11

B. Installing the Latest DSM/SCM SPRs and Client Software

Before You Begin Installing the Software Identification (SWID) and DSM/SCM

SPRs B-4

Alerts B-4

Determine the Product Version of DSM/SCM on the Host System B-4

Determine the Product Version of DSM/SCM on the Client B-5

Copy (RESTORE) the T6031ABR DSM/SCM Product Version and SWID to Disk B-6

Receive the G02 SPRs for DSM/SCM B-6

Create a New Software Revision for DSM/SCM G02 SPR and G02 SWID B-9

Build and Apply the DSM/SCM G02 Software Revision B-10

Rename the Applied DSM/SCM G02 Files B-12

Run the INSTALL^TEMPLATES Macro B-12

Restart Applications

B-13

Before Starting DSM/SCM

B-13

Start DSM/SCM B-13

Verify That the Newest Product Version of DSM/SCM Is Installed B-14

Verify That SWID Is Installed B-14

Recovery for Problems While Installing the G02 PVU of DSM/SCM B-15

If NonStop Errors Are Displayed B-15

Install the DSM/SCM Client From ZDSMSCM B-15

Alert (DSM/SCM T6031G02 Client) B-15

Determine Your DSM/SCM Client Software Version B-16

Determine the Current IP Address and Port Number B-16

Copy the ZDSMSCM Client File From the Host B-17

Install the DSM/SCM Client Software B-18