G06.28 Software Installation and Upgrade Guide

Overview of Installing G06.28
G06.28 Software Installation and Upgrade Guide—541688-001
1-3
OSM Client-Based Components (S7X-SWV1/HNSC-
SWV1, Update 7 and Update 8)
•
The OSM Low-Level Link has a direct link to the SP tool. (Select Advanced
Service Processor Tool from the Tools menu).
•
The OSM Low-Level Link does not have a direct link to the TSM Event Viewer
(Instead, select Start > Programs > Compaq TSM > TSM Event Viewer.)
•
The Action Status Summary is not available in the OSM Low-Level Link.
•
The Single SP Firmware update is also not available on the menu bar. Use the
right-click and Actions instead.
OSM Client-Based Components (S7X-SWV1/HNSC-SWV1,
Update 7 and Update 8)
NonStop System Console software is dual-threaded, meaning that it is used for both
G-series and H-series. At G06.28, Update 7 of the Installer CD contains the latest
available console software. Update 8 will be available post G06.28. For more
information regarding new OSM and TSM SPRs, see Scout.
OSM is designed to support new functions available in G06.21 and later RVUs.
Client installation instructions are included in the NonStop System Console Installer
Guide. There are three client-based OSM components. All OSM components are
installed from the NonStop System Console Installer CD, either from the master
installer or individually from their own separate installers.
For Installer S7X-SWV1/HNSC-SWV1, Update 7, the client components are OSM Low-
Level Link, OSM Notification Director, and OSM Console Tools:
•
OSM Low-Level Link. S7X-SWV1/HNSC-SWV1, Update 7 includes the T6033AAM
SPR; T76033AAO will be available on Update 8.
The OSM Low-Level Link Application looks and functions much like the TSM Low-
Level Link Application (see Figure 1-1 on page 1-4). For a list of minor interface
differences, see TSM and OSM Client Applications on page 1-2