G06.28 Software Installation and Upgrade Guide

Contents

G06.28 Software Installation and Upgrade Guide—541688-001

8. Updating Processor Boot Code

Recovery for Problems Updating SP Firmware (Using TSM) (continued)

Resetting an SP Using the TSM Low-Level Link Application 7-18

Updating SP Firmware Using the OSM Service Connection 7-20

Notes for Using OSM to Update SP Firmware 7-20

Firmware Update for Fabric Side-Y (Using OSM) 7-20

Firmware Update for Fabric Side-X (Using OSM) 7-25

Verifying the SP Firmware Update (Using OSM) 7-26

Correcting a Failed SP Firmware Update (Using the OSM Service

Connection) 7-28

Updating Firmware Using the OSM Low-Level Link (Optional) 7-28

8. Updating Processor Boot Code

Before You Begin Updating the Boot Millicode 8-3

Check Processor Status 8-3

Verify Your TSM and OSM Versions 8-3

Verify Location and Version of Processor Boot Code 8-3

Method 1: Using G06.24 or Later OSM or TSM SPRs, Update Processor Boot Code

Using the Explicit Online Option 8-4

Using TSM, Update Processor Boot Code Using the Online Option and G06.24 or

Later TSM SPRs 8-5

Using OSM, Update Processor Boot Code Using the Online Option and G06.24 or

Later OSM SPRs 8-7

Method 2: Using Your Current Pre-G06.24 OSM or TSM SPRs, Update the Processor

Boot Code and Issue a Reset Action or Equivalent 8-10

Using TSM, Update the Processor Boot Code and Issue a Reset Action or

Equivalent 8-10

Using OSM, Update the Processor Boot Code and Issue a Reset or

Equivalent 8-14

Reset the Processors To Complete Updating the Processor Boot Code (Both for

OSM and TSM) 8-17

9. Updating SCSI Boot Code

(Pre-G06.08 RVU)

SCSI Boot Code Product Numbers 9-1

Using TSM to Update SCSI Boot Code (If Necessary) 9-2

Using OSM to Update SCSI Boot Code (If Necessary) 9-4

10. Running ZPHIRNM

Alerts 10-1

Back Up (Copy) Files in the $SYSTEM.ZTCPIP Subvolume 10-2

Stop All Applications 10-3