G06.28 Software Installation and Upgrade Guide

Installing SPRs Before Upgrading to the G06.28
RVU
G06.28 Software Installation and Upgrade Guide—541688-001
3-10
Configuring OSM Server Settings
If you are running a version of OSM released with G06.25 or later, the versions
reported in this dialog box for each OSM component should match, as all OSM server-
based components were bundled into T0682.
The OSM server-based SPR for G06.28 is T0682G07^AAL. HP recommends always
using the latest OSM SPR. To see whether an OSM upgrade is required for your
situation, see OSM and TSM on page 1-5.
Configuring OSM Server Settings
OSM server processes do not require configuration. For optional configuration
information, see the OSM Migration Guide.
TSM Server and Client Compatibility SPRs
The newest TSM server SPR is T7945ABS, and the TSM client version 2003A
(T8154G07) is compatible with T7945AAG through T7945ABS. You should always
install the latest TSM SPR and corresponding client.
If you use TSM to monitor your system, you should always install the latest TSM server
and client. For G06.28, the current TSM server SPR is T7945ABS, and the current
TSM client SPR is T8154ABI (T005A). HP recommends that you upgrade the TSM
client before you install the G06.28 RVU. Doing so enables you to use the latest TSM
client software for G06.28 upgrade tasks. It also enables you to continue using the
VST937.vsd