G06.29 Software Installation and Upgrade Guide

Updating Service Processor (SP) Firmware
G06.29 Software Installation and Upgrade Guide—542744-003
7-9
Update SP Firmware Using the TSM Service
Application
3. Using the Service Processors (SPs) list, determine which fabric (X or Y) contains
the secondary master service processor. You must select this fabric when you
begin updating service processor firmware:
•
If an asterisk appears on the line for GRP-1.MOD-1.SLOT-50, the Y fabric
contains the secondary master service processor. Select the Y fabric for the
remaining steps in this procedure.
•
If an asterisk appears on the line for GRP-1.MOD-1.SLOT-55, the X fabric
contains the secondary master service processor. Select the X fabric for the
remaining steps in this procedure.
vst630.vsd