G06.29 Software Installation and Upgrade Guide

ManualsBrandsHP ManualsServerHP NonStop G-Series

Overview of Installing G06.29

G06.29 Software Installation and Upgrade Guide—542744-003

1-18

Installing a New RVU

Table 1-6. Tasks and Tools for Installing the G06.29 RVU (page 1 of 2)

To Perform This Task... Use This Tool... Documented in...

1. Install the T6031G02 product

version of DSM/SCM and

fallback/interoperability

SPRs. HP recommends that

you install the T6031G02

SPR on the host and on the

client. You must also install

the SWID product T9298G02

if you are installing the

T6031ABU SPR available on

the SUT.

DSM/SCM Planner

Interface

Section 3, Installing SPRs

Before Upgrading to the

G06.29 RVU

Appendix B, Installing the

Latest DSM/SCM SPRs

and Client Software

2. Save the current

configuration file

(CONFxxyy).

Subsystem Control

Facility (SCF)

Section 4, Preparing to

Upgrade the Server

Software

3. Upgrade the system console

to the latest TSM or OSM

client software (if necessary).

(See Caution under OSM

and TSM on page 1-5.)

HP NonStop System

Console Installer CD

HP NonStop System

Console Installer CDGuide

System Console

Requirements on page 1-1

4. Receive new G06.29

software into the DSM/SCM

Archive.

DSM/SCM Planner

Interface

Section 5, Installing the

G06.29 RVU

5. Create a new software

revision.

DSM/SCM Planner

Interface

Section 5, Installing the

G06.29 RVU

6. Build and apply the activation

package.

DSM/SCM Planner

Interface

Section 5, Installing the

G06.29 RVU

7. Install and configure the

latest TSM or OSM server

SPRs. Install the G06.24 or

later client and server SPRs

if using the explicit online

boot code option in OSM or

TSM. (See Caution under

OSM and TSM

on page 1-5.)

DSM/SCM Planner

Interface

See the OSM Migration

Guide or TSM softdocs.

Section 3, Installing SPRs

Before Upgrading to the

G06.29 RVU