G06.29 Software Installation and Upgrade Guide

Overview of Installing G06.29

G06.29 Software Installation and Upgrade Guide—542744-003

1-41

Safeguard

Safeguard Configuration

Starting with G06.25 RVU, you must not manually include Safeguard in the OSIMAGE.

Otherwise, a TACL prompt does not appear.

To configure the Safeguard software to run continuously from the time the system is

loaded until the time it is stopped, add the Safeguard software as a persistent process

S76000SE G06.25 S76000SE PMF CRUs must be removed.

These PMF CRUs are supported for G06.16

and later RVUs only.

S86000 G06.16 S86000 PMF CRUs must be removed. These

PMF CRUs are supported for G06.16 and

later RVUs only.

S86000SE G06.25 S86000SE PMF CRUs must be removed.

These PMF CRUs are supported for G06.16

and later RVUs only.

S7800 G06.23 S7800 CRUs must be removed. These PMF

CRUs are supported for G06.16 and later

RVUs only. See the Interactive Upgrade Guide

2 for details.

S7800SE G06.25 S7800SE CRUs must be removed. These

PMF CRUs are supported for G06.16 and

later RVUs only. See the Interactive Upgrade

Guide 2 for details.

S78000 G06.24 S78000 CRUs must be removed. These PMF

CRUs are supported for G06.16 and later

RVUs only. See the Interactive Upgrade Guide

2 for details.

S78000SE G06.25 S78000 CRUs must be removed. These PMF

CRUs are supported for G06.16 and later

RVUs only. See the Interactive Upgrade Guide

2 for details.

S88000 G06.24 S88000 CRUs must be removed. These PMF

CRUs are supported for G06.24 and later

RVUs only. See the Interactive Upgrade Guide

2 for details.

S88000SE G06.25 S88000SE CRUs must be removed. These

PMF CRUs are supported for G06.24 and

later RVUs only. See the Interactive Upgrade

Guide 2 for details.

Table 1-9. Upgrading to NonStop S-Series CRUs and Falling Back (page 2 of 2)

NonStop PMF CRU

Introduced in

this RVU Action