G06.29 Software Installation and Upgrade Guide

Preparing to Upgrade the Server Software

G06.29 Software Installation and Upgrade Guide—542744-003

4-3

Verify System Operations

Starting with the G06.24 RVU, the CSSI Web snapshot is no longer provided on the

installer CD, but the CSSI content can be accessed within NTL through the Support

and Service library. The library categories provide service information, procedures, part

numbers, troubleshooting tips, and tools for servicing NonStop S-series and Integrity

NonStop NS-series systems. Within these categories, where applicable, content might

be further categorized according to server or enclosure type.

Authorized service providers can also order the NTL Support and Service Library CD.

To install Windows XP Professional, which is the recommended operating system for

using OSM, see the NonStop System Console Guide for Migrating to Microsoft

Windows XP Professional.

HP recommends that you upgrade to Microsoft Windows XP Professional first before

upgrading your NonStop system console. However, if you use the Installer CD first, and

then migrate to Windows XP Professional, use the Installer CD again to make sure that

all applications are correctly installed. You can now install Windows XP Service Pack 2.

If you want to use OSM client-based components and server software before or after

installing the G06.29 RVU, see the OSM Migration Guide.

To ensure that the OSM Notification Director runs as a persistent service:

1. Select Start > Settings > Control Panel > Administrative Tools > Services.

2. Select the OSM Notification Director from the list of Services.

3. Right-click and select Properties.

4. Select the Recovery tab and change the properties for First, Second and

Subsequent failures to Restart the Service.

5. Click OK to apply the changes.

Verify System Operations

Verify the integrity of your current system environment to ensure your system is

operating normally before you install the G06.29 RVU by checking Table 4-1.

Note. New system console requirements must be met if you decide to use OSM as your

default client whether you migrate to Windows XP Professional. See the OSM Migration Guide

or the NonStop System Console Installer Guide for more information.

Table 4-1. Verify System Operations

Steps Activity Done?

Check Processor Status (Using Either TSM or OSM)

Using TSM

Using OSM

Check Critical System Processes

Using TSM