G06.30 Software Installation and Upgrade Guide

Updating Processor Boot Code
G06.30 Software Installation and Upgrade Guide—543764-002
8-8
Using OSM, Update Processor Boot Code Using the
Online Option and G06.24 or Later OSM SPRs
3. From the Resource Type list, select Processor.
4. From the Action list, select Online Boot Millicode Firmware Update.
5. From the Filter by list, select Logical: Fabric Side-Y.
6. Click Add All to move the selected resources to update the firmware list:
7. Click Perform Action.
8. Click OK when the Confirm Processor Boot Millicode Firmware Update dialog box
appears.
The Processor-Parameter Input dialog box appears.
9. Enter the file location, $volume.subvolume.filename, created during the
most recent DSM/SCM Build/Apply, and click OK. For example:
$system.sys01.cpucode9
As the firmware update is performed, information about it appears in the Progress
List.
VST938.vsd