G06.30 Software Installation and Upgrade Guide

Overview of Installing G06.30
G06.30 Software Installation and Upgrade Guide—543764-002
1-12
Updating Firmware
You must use OSM to update firmware for products not supported by TSM, such as the
6780 ServerNet Switch, IOAM MEs, FCSA, G4SA, and Fibre Channel disks. For
information on using OSM to update firmware, see the OSM online help.
Table 1-1 lists the updateable firmware for processors, SPs, and SCSI SACs.
Note. SP firmware T1089ABP or later is required to attach a NonStop S-series I/O enclosure
to the HP Integrity NonStop NS-series system. See Scout for the most recent T1089 SPR.To
connect an IOAM enclosure to a NonStop S-series system in a group other than group 01, you
must ensure that T1089ABR or later is installed. When using the Low-Level Link application to
update T1089, you must use FTP to transfer the file SPNTCDE9 from the host to the PC.
Other interoperability SPRs (FCSA, G4SA) might also need to be installed before attaching an
IOMF2 CRU to an Integrity NonStop NS-series system. See Table 1-1
on page 1-12, Table 1-2
on page 1-13, and the IUG2 for more information.
Table 1-1. G06.30 Updateable Firmware for Processors, SPs, and SCSI SACs
Product
Number Description
Host
CRU/FRU
Disk File
Name
Default
Location Tool
Related
Information
T0503AAB SCSI boot
code
PMF and
PMF 2
IBOOT SYSnn
subvolume
TSM SA
and LLL
OSM SC
Section 11,
Loading the
G06.30
RVU; TSM
or OSM
online help
T1089ABS SP firmware PMF and
PMF 2;
IOMF and
IOMF2
SPCODE9 SYSnn
subvolume
TSM SA
and LLL
OSM SC
and LLL
Section 7,
Updating
Service
Processor
(SP)
Firmware;
TSM or
OSM online
help
T8461AAE NonStop
S7000
processor
firmware
PMF and
PMF 2
CPUCODE8 SYSnn
subvolume
TSM SA
and LLL
OSM SC
Section 8,
Updating
Processor
Boot Code;
TSM or
OSM Online
User Guide
T7892ABD NonStop
S70000
S74000
S7600
S7800
S78000
S8x000
processor
firmware
PMF and
PMF 2
CPUCODE9 SYSnn
subvolume
TSM SA
and LLL
OSM SC
Section 8,
Updating
Processor
Boot Code;
TSM or
OSM Online
User Guide