G06.30 Software Installation and Upgrade Guide

Overview of Installing G06.30
G06.30 Software Installation and Upgrade Guide—543764-002
1-45
Spooler
•
After fallback, if OSS-related operations are to be audited, enable the AUDIT-
CLIENT-SERVICE attribute if it is not already enabled.
Migration With Standard Security (Safeguard Not Installed)
Once the new version is installed, use the new PWCONFIG utility to modify the
appropriate attributes if you do not want to accept the new default values.
Fallback With Standard Security (Safeguard Not Installed)
In all cases, install the previous version of Standard Security.
If ENCRYPTPASSWORD is OFF or ALGORITHM is set to DES, no extra fallback
steps are required.
If ALGORITHM is set to HMAC256:
•
When users first change their password after HMAC256 is enabled, they must
remember their immediate previous password.
•
After fallback, users must use their old password to log into the system if:
°
Their user account existed before the installation of the H03 version of
Standard Security.
or
°
They are new users whose password was encrypted in DES or not encrypted
at all before ALGORITHM was changed to HMAC256.
•
If users were added to the system after ALGORITHM was changed to HMAC256,
they must use a blank password to log into the system.
Spooler
If your current product version of spooler is T9101D41^ADM or later, you do not need
to restore copies of both the control file and the collector data files if you must back out
of the new RVU. All versions of T9101D41, starting with T9101D41^ADM, contain
Version 5 of the spooler control file and are compatible with the T9101D46 and D48
product versions of spooler. However, it is always recommended that you back up both
the spooler control file and collector data files before migrating or changing the
configuration.