G06.30 Software Installation and Upgrade Guide

Contents

G06.30 Software Installation and Upgrade Guide—543764-002

8. Updating Processor Boot Code

Determining If a Problem Has Occurred (continued)

Problems Updating SP Firmware (Using TSM) 7-15

Other Indications of SP Firmware Update Problems 7-16

Problems Resetting an SP (Using TSM) 7-16

Recovery for Problems Updating SP Firmware (Using TSM) 7-16

If an SP Firmware Update Fails 7-16

Checking the State of the Service Connection 7-17

Correcting a Failed SP Firmware Update (Using TSM) 7-17

Updating Firmware Using the TSM Low-Level Link Application (Optional) 7-18

Resetting an SP Using the TSM Low-Level Link Application 7-18

Updating SP Firmware Using the OSM Service Connection 7-20

Notes for Using OSM to Update SP Firmware 7-20

Firmware Update for Fabric Side-Y (Using OSM) 7-20

Firmware Update for Fabric Side-X (Using OSM) 7-25

Verifying the SP Firmware Update (Using OSM) 7-26

Correcting a Failed SP Firmware Update (Using the OSM Service

Connection) 7-28

Updating Firmware Using the OSM Low-Level Link (Optional) 7-28

8. Updating Processor Boot Code

Before You Begin Updating the Boot Millicode 8-3

Check Processor Status 8-3

Verify Your TSM and OSM Versions 8-3

Verify Location and Version of Processor Boot Code 8-3

Method 1: Using G06.24 or Later OSM or TSM SPRs, Update Processor Boot Code

Using the Explicit Online Option 8-4

Using TSM, Update Processor Boot Code Using the Online Option and G06.24 or

Later TSM SPRs 8-5

Using OSM, Update Processor Boot Code Using the Online Option and G06.24 or

Later OSM SPRs 8-7

Method 2: Using Your Current Pre-G06.24 OSM or TSM SPRs, Update the Processor

Boot Code and Issue a Reset Action or Equivalent 8-10

Using TSM, Update the Processor Boot Code and Issue a Reset Action or

Equivalent 8-10

Using OSM, Update the Processor Boot Code and Issue a Reset or

Equivalent 8-14

Reset the Processors To Complete Updating the Processor Boot Code (Both for

OSM and TSM) 8-16