G06.30 Software Installation and Upgrade Guide

G06.30 Upgrade Checklists
G06.30 Software Installation and Upgrade Guide—543764-002
2-3
G06.30 Upgrade Checklist
24. Check processor status <1 minute Check Processor Status (Using
TSM or OSM) on page 12-4
25. Configure WANMGR (if
necessary)
20 minutes Upgrade the WAN Manager
(T8365) (Optional) on page 12-16
26. Update SWAN
concentrator CLIP
firmware (if necessary)
4 minutes
per SWAN
concentrato
r
Appendix C, Updating SWAN
Concentrator CLIP Firmware
27. Update ServerNet/FX
firmware (if necessary)
3 minutes
per adapter
Update ServerNet/FX and
ServerNet/FX2 Firmware on
page 12-6
28. Configure the Spooler (if
necessary)
2 minutes Configure the Spooler
on
page 12-9
29. Configure Spooler Plus
and Enform Plus
(optional products)
10 minutes See the appropriate softdocs and
product documentation. See also
Configure Spooler Plus and
Enform Plus on page 12-16.
30. Start system and
application software
11 minutes Start User and System
Applications on page 12-10
31. Reset and start the
system mirror disk (if
necessary)
2 minutes
(not
including
the
REVIVE)
Reset and Start the Mirror System
Disk (If Necessary) on page 12-11
32. Configure OSS (if
necessary)
20
minutes
****
Configure OSS on page 12-13
33. Configure SMF (if
necessary)
60 minutes Configure SMF (Optional)
on
page 12-15
34. Configure RDF (if
necessary)
5 minutes Configure the Remote Database
Facility (RDF) on page 12-15
35. Install, and configure
OSM client-based
components and server if
not done in Step 9.
20
minutes***
See the OSM Migration and
Configuration Guide and Support
Note S03133B.
* Duration depends on the SPRs (if any) you need to install.
**Duration depends on selected TSM or OSM installation and configuration options.
***Duration of each remaining task depends on what products are installed on your system.
*
**
***
****
Table 2-1. G06.30 Upgrade Checklist (page3of3)
Task Description
Minimum
Duration Documentation Done?