G06.31 Software Installation and Upgrade Guide

Contents
G06.31 Software Installation and Upgrade Guide—544626-002
ix
18. Loading the Previous RVU and Resuming
Normal Operations (continued)
18. Loading the Previous RVU and Resuming Normal
Operations (continued)
Configure Spooler 18-5
Reconfigure DSM/SCM User IDs (If Necessary) 18-5
A. Using DSM/SCM to Install SPRs
Tools for Managing SPRs A-1
Scout for NonStop Servers A-1
DSM/SCM A-2
SPRNOTES A-2
Install SPRs With DSM/SCM A-2
Save the Current Configuration A-2
Determine the Current SYSnn A-3
Receive the SPR Into the DSM/SCM Archive A-4
Create a New Software Configuration That Includes the SPR A-5
Build the New Revision A-5
Print Operator Instructions From the Target Interface (ZPHITI) A-6
Run ZPHIRNM A-6
If Running INSTALL^TEMPLATES Is Required A-7
If a System Load Is Required A-9
Halt the Processors A-9
Perform a System Load A-10
Reload the Processors (If Necessary) A-11
Start Your Applications and Processes A-11
B. Installing the Latest DSM/SCM SPRs and Client Software
Before You Begin Installing the Software Identification (SWID) and DSM/SCM
SPRs B-3
Alerts B-3
Determine the Product Version of DSM/SCM on the Host System B-4
Determine the Product Version of DSM/SCM on the Client B-4
Copy (RESTORE) the T6031ABU DSM/SCM Product Version and SWID to Disk B-5
Receive the G02 SPRs for DSM/SCM B-5
Create a New Software Revision for DSM/SCM G02 SPR and G02 SWID B-7
Build and Apply the DSM/SCM G02 Software Revision B-8
Rename the Applied DSM/SCM G02 Files B-10
Run the INSTALL^TEMPLATES Macro B-10
Restart Applications B-11
Before Starting DSM/SCM B-11