G06.31 Software Installation and Upgrade Guide

Overview of Installing G06.31
G06.31 Software Installation and Upgrade Guide—544626-002
1-2
TSM and OSM Client Applications
If you are migrating a G-series system console to use OSM, certain client-side
requirements must be met. See the NonStop system Console Installer Guide and the
OSM Migration and Configuration Guide for PC system requirements and information
on migrating to OSM.
Unless OSM is already installed and configured on your server, use the TSM client and
TSM server software to update firmware and perform a system load to the new G06.31
RVU. To use OSM, certain client-side system requirements must be met. For PC
system requirements and information on migrating to OSM, see the HP NonStop
System Console Installer Guide and the OSM Migration and Configuration Guide .
You can have both the TSM client and the OSM client-based components on your
system consoles. However, to avoid duplicate dial-outs, use either the OSM
Notification Director (ND) or TSM Notification Director, but not both.
HP Systems Insight Manager (SIM)
HP Systems Insight Manager (SIM) can now be used in conjunction with OSM
software to help manage your NonStop servers. HP SIM supports the NonStop
platform via Web-Based Enterprise Management (WEBM)) provided by OSM. HP SIM
is capable of discovering NonStop systems, displaying and forwarding alarms
generated by OSM, and collecting NonStop system and device data.
HP SIM can be installed from the NSC Installer CD S7X-SWV1/HNSC-SW1, Update 7,
or later (for installation details, see the NonStop System Console Installer Guide ).
Using HP SIM in the NonStop environment requires:
•
OSM server version T0682G07^AAM or later
•
OSM Notification Director version T0632AAN or later
•
Secure Sockets Layer (SSL) must be enabled in OSM (for details, see the OSM
Migration and Configuration Guide )
TSM and OSM Client Applications
After installing the appropriate SPRs, including the latest TSM server SPR (see
DSM/SCM T6031ACD SPR on page 4-3), upgrade your TSM client software to the
latest version.
Use the HP NonStop System Console Installer DVD to upgrade TSM applications on
the Windows operating system. For instructions on using this DVD to upgrade your
system console, see the HP NonStop System Console Installer Guide .
After installing the latest TSM server and client software, use the TSM Service
Application and the OSM Low-Level Link Application to update firmware and to halt
and restart the system. After you have migrated to G06.31, you can then install and
configure OSM (if not previously installed).
Note. In future RVUs, only OSM will support new functionality.