G06.31 Software Installation and Upgrade Guide

Contents

G06.31 Software Installation and Upgrade Guide—544626-002

9. Updating Processor Boot Code

Determining If a Problem Has Occurred (continued)

Problems Updating SP Firmware (Using TSM) 8-15

Other Indications of SP Firmware Update Problems 8-16

Problems Resetting an SP (Using TSM) 8-16

Recovery for Problems Updating SP Firmware (Using TSM) 8-16

If an SP Firmware Update Fails 8-16

Checking the State of the Service Connection 8-17

Correcting a Failed SP Firmware Update (Using TSM) 8-17

Updating Firmware Using the TSM Low-Level Link Application (Optional) 8-18

Resetting an SP Using the TSM Low-Level Link Application 8-18

Updating SP Firmware Using the OSM Service Connection 8-20

Notes for Using OSM to Update SP Firmware 8-20

Firmware Update for Fabric Side-Y (Using OSM) 8-20

Firmware Update for Fabric Side-X (Using OSM) 8-25

Verifying the SP Firmware Update (Using OSM) 8-26

Correcting a Failed SP Firmware Update (Using the OSM Service

Connection) 8-28

Updating Firmware Using the OSM Low-Level Link (Optional) 8-28

9. Updating Processor Boot Code

Before You Begin Updating the Boot Millicode 9-3

Check Processor Status 9-3

Verify Your TSM and OSM Versions 9-3

Verify Location and Version of Processor Boot Code 9-3

Method 1: Using G06.24 or Later OSM or TSM SPRs, Update Processor Boot Code

Using the Explicit Online Option 9-4

Using TSM, Update Processor Boot Code Using the Online Option and G06.24 or

Later TSM SPRs 9-5

Using OSM, Update Processor Boot Code Using the Online Option and G06.24 or

Later OSM SPRs 9-7

Method 2: Using Your Current Pre-G06.24 OSM or TSM SPRs, Update the Processor

Boot Code and Issue a Reset Action or Equivalent 9-10

Using TSM, Update the Processor Boot Code and Issue a Reset Action or

Equivalent 9-10

Using OSM, Update the Processor Boot Code and Issue a Reset or

Equivalent 9-14

Reset the Processors To Complete Updating the Processor Boot Code (Both for

OSM and TSM) 9-16