G06.32 Software Installation and Upgrade Guide

Contents

G06.32 Software Installation and Upgrade Guide—546068-002

C. Installing the Latest DSM/SCM SPRs and Client

Software

C. Installing the Latest DSM/SCM SPRs and Client Software

Before You Begin Installing the Software Identification (SWID) and DSM/SCM

SPRs C-3

Alerts C-3

Determine the Product Version of DSM/SCM on the Host System C-4

Determine the Product Version of DSM/SCM on the Client

C-4

Copy (RESTORE) the T6031G07^ACH DSM/SCM Product Version and SWID to

Disk C-5

Receive the G02 SPRs for DSM/SCM

C-5

Create a New Software Revision for DSM/SCM G02 SPR and G02 SWID

C-7

Build and Apply the DSM/SCM G02 Software Revision C-8

Rename the Applied DSM/SCM G02 Files C-10

Run the INSTALL^TEMPLATES Macro C-10

Restart Applications C-11

Before Starting DSM/SCM

C-11

Start DSM/SCM

C-11

Verify That the Newest Product Version of DSM/SCM Is Installed C-12

Verify That SWID Is Installed C-13

Recovery for Problems While Installing the G02 PVU of DSM/SCM C-13

If NonStop Errors Are Displayed C-13

Install the DSM/SCM Client From ZDSMSCM C-13

Alert (DSM/SCM T6031G02 Client) C-14

Determine Your DSM/SCM Client Software Version C-14

Determine the Current IP Address and Port Number C-14

Copy the ZDSMSCM Client File From the Host C-15

Install the DSM/SCM Client Software C-16

Create an ERD or ASR Disk

C-22

Glossary

Index

Figures

Figure 1-1. OSM Low-Level Link Application 1-4