G06.32 Software Installation and Upgrade Guide

Installing the G06.32 RVU
G06.32 Software Installation and Upgrade Guide—546068-002
6-13
Build and Apply the New Software Revision
•
To include all products, click Select All and click Continue.
Do not retain the following products; if you attempt to retain them, errors will occur
during the build:
•
T9683 (NSX)
•
T8975 (OMF)
•
T8484 (NSXGEM)
•
T5870 (OMFGUI)
The New software revision list now displays the new RVU level.
6. Keep the Planner Interface open for the next task.
Build and Apply the New Software Revision
The Build process creates an activation package containing all the products listed in
the new software revision.
To avoid disrupting other system activity, schedule the Build to run at night and the
Apply to run immediately after the Build. See the DSM/SCM User’s Guide for
information about scheduling the Build/Apply to run at different times.
To build and apply the new software revision:
1. In the New software revision dialog box, click Build/Apply to display the options
for your Build/Apply.
It might take several minutes for DSM/SCM to assemble the build information.
During this time, the Build/Apply Request dialog box options and commands are
dimmed and unavailable.
Note. The Activation Package contains installation instructions for the pax files of those OSS
products that contain A7CINFO files in their distributed subvolumes.