G06.32 Software Installation and Upgrade Guide

Installing the G06.32 RVU
G06.32 Software Installation and Upgrade Guide—546068-002
6-15
Build and Apply the New Software Revision
2. Under Perform steps, select Build, apply & process snapshot.
3. In the Activation SYSnn: box, enter a unique number to create a new SYS nn
subvolume. The value nn must be a two-digit octal number in the range%00...%77.
You can issue a FILEINFO command at a TACL prompt to view the SYS nn
subvolumes that are currently on your system. (For other ways to determine the
SYS
nn , see Determine the Current SYSnn on page A-3.)
> fileinfo $system.*.osimage
4. Make a note of the new SYS nn . You will specify this SYS nn subvolume when:
•
Using the VPROC command to verify the location and version of your firmware
•
Specifying the location of firmware for the new RVU
•
Running ZPHIRNM
•
Loading the G06.32 RVU
5. Click Edit instructions to display the Planner Instructions box.