G06.32 Software Installation and Upgrade Guide

Installing the G06.32 RVU
G06.32 Software Installation and Upgrade Guide—546068-002
6-20
Print Operator Instructions From the Target Interface
(ZPHITI)
below.
=============================================================================
1 Create system report
2 Create system snapshot
3 Perform target activities
4 Perform audit
5 Perform database verify
9 Enable trace (for support use only)
=============================================================================
F1-Select F4-Show Messages
F15-Help F16-Return SF16-
Exit
Ready
3. From the ZPHITI Main Menu, enter 3 (Perform target activities) in the Selection
number field, and press F1 to display the Target Menu - Select Target screen.
DSM Software Configuration Manager Target Menu - Select
Target
=============================================================================
\WARRIOR Prior snapshot 2000-09-20:12:18:44
Selection number:
=============================================================================
Choose a target selection number from the list below. Status information is
shown for requests still in progress.
=============================================================================
1 NEW CONFIG
2 DEFAULT
3
4
5
6
7
8
9
===========================More Targets
PgDn/PgUp=============================
F1-Select
F15-Help F16-Return SF16-
Exit
Ready
4. In the Selection number field, enter the number corresponding to the logical target
to which you applied the software (selection 2 in this example), and press F1 to
display the Target Menu - Select Action screen.
DSM Software Configuration Manager Target Menu - Select
Action
=============================================================================
\WARRIOR Prior snapshot 2002-11-20:12:18:44
DEFAULT Last S/W applied on SYS 00 on 2002-11-22:12:17