G06.32 Software Installation and Upgrade Guide

Loading the G06.32 RVU
G06.32 Software Installation and Upgrade Guide—546068-002
12-8
The Reset Operation
The Reset Operation
The Reset operation terminates all processes running on a processor, stops the
processor, and places the processor in a known state, ready for a Prime for Reload or
Load action.
1. If necessary, log on to the OSM Low-Level Link or the TSM Low-Level Link
Application.
2. On the toolbar, click Processor Status to display the Processor Status dialog box.
3. From the Processor Status list, select the processors you want to reset.
4. From the Processor Actions list, select Reset.
5. Click Perform action.
6. Monitor the status of the Reset action. After the reset has finished successfully, a
completed message appears.
If the Reset fails, retry the action.
Caution. Performing a Hard Reset action on a processor results in an unrecoverable loss of
data. Use the Hard Reset action only to prepare for reloading the processors or after updating
processor bootcode if you did not select the explicit online boot code option.
You cannot use the Hard Reset action unless the Installer CD S7X-SWV1/HNSC-SWV1,
Update 7 or later, is installed.