G06.32 Software Installation and Upgrade Guide

Installing the Latest DSM/SCM SPRs and Client
Software
G06.32 Software Installation and Upgrade Guide—546068-002
C-4
Determine the Product Version of DSM/SCM on the
Host System
•
Save the current configuration database (see Save the Current Configuration File
(CONFxxyy) on page 5-1).
•
Keep the startup TACL windows, the EMS Event Stream window, and the
DSM/SCM client interface windows open whenever you are performing a
Build/Apply. Otherwise, Build/Apply errors result.
•
If you receive an error indication in the Request Status window, you might have to
reinitiate the Build/Apply. To learn the nature and severity of the problem, see the
DSM/SCM Messages Manual .
Determine the Product Version of DSM/SCM on the Host System
To determine which product version of DSM/SCM is currently installed on your system,
enter the VPROC command to determine the product version of TAEXE (Apply product
of DSM/SCM) and CBEXE (Build product of DSM/SCM).
At a TACL prompt, enter:
> volume $ dsmscm_vol .ZDSMSCM
> vproc taexe
> vproc cbexe
If VPROC commands do not display the VPROC versions shown next, install the latest
DSM/SCM product version, as described in Copy (RESTORE) the T6031G07^ACH
DSM/SCM Product Version and SWID to Disk on page C-5.
$DSMSCM.ZDSMSCM.TAEXE
Binder timestamp: 03AUG2005 05:54:43
Version procedure: S7032D20^27FEB04^SWARCCP^AAH
Version procedure: T6031G02_30AUG2005_03AUG05G02
Target CPU: UNSPECIFIED
AXCEL timestamp: 03AUG2005 05:59:09
Privileged code: YES
\bitty $DSMSCM.ZDSMSCM 7> vproc cbexe
VPROC - T9617H01 - (01 OCT 2004) SYSTEM \BITTY Date 25 AUG 2005, 15:14:35
Copyright 2004 Hewlett-Packard Development Company, L.P.
$DSMSCM.ZDSMSCM.CBEXE
Binder timestamp: 03AUG2005 05:35:37
Version procedure: S7032D20^27FEB04^SWARCCP^AAH
Version procedure: T6031G02_30AUG2005_03AUG05G02
Target CPU: UNSPECIFIED
AXCEL timestamp: 03AUG2005 05:39:21
Privileged code: YES
\bitty $DSMSCM.ZDSMSCM 8>
Determine the Product Version of DSM/SCM on the Client
To determine which product version of DSM/SCM client software is installed, start the
DSM/SCM Planner Interface. Before prompting you to log on, the About DSM/SCM
window briefly displays product version information.