G06.32 Software Installation and Upgrade Guide

Installing the Latest DSM/SCM SPRs and Client
Software
G06.32 Software Installation and Upgrade Guide—546068-002
C-12
Verify That the Newest Product Version of
DSM/SCM Is Installed
PATHWAY CONTROL FILE DATED: 02 AUG 2005, 11:24:50
$Z1J3: WARN - *1079* SERVER CB-001, NO STATIC SERVERS DEFINED
$Z1J3: WARN - *1079* SERVER IS-001, NO STATIC SERVERS DEFINED
$Z1J3: WARN - *1079* SERVER MISERVER, NO STATIC SERVERS DEFINED
$Z1J3: SERVER OM-001, STARTED
$Z1J3: SERVER SM-001, STARTED
$Z1J3: SERVER SM-T-001, STARTED
$Z1J3: SERVER T9154-HELP-SERV, STARTED
$Z1J3: WARN - *1079* SERVER TA-001, NO STATIC SERVERS DEFINED
$Z1J3: WARN - *1079* SERVER TISERVER, NO STATIC SERVERS DEFINED
$Z1J3: WARN - *1079* SERVER US-001, NO STATIC SERVERS DEFINED
$Z1J3: TCP TCP-H, STARTED
$Z1J3: TCP TCP-T, STARTED
2. If necessary, press Enter to have STARTSCM run the IPM6031 TACL macro
automatically. This step takes several minutes.
Verify That the Newest Product Version of DSM/SCM Is Installed
To verify that the latest product version of DSM/SCM is currently installed on your
system, enter the VPROC command to display the product version of TAEXE (Apply
product of DSM/SCM) and CBEXE (Build product of DSM/SCM). At a TACL prompt,
enter:
> volume $ dsmscm_vol .ZDSMSCM
> vproc taexe
> vproc cbexe
This example shows the T6031ABR product version of DSM/SCM after DSM/SCM has
been activated. (Bold lettering is used to show the VPROC command and the latest
version as of G06.28):
$DSMSCM.ZDSMSCM.TAEXE
Binder timestamp: 05DEC2005 05:54:43
Version procedure: S7032D20^27FEB04^SWARCCP^AAH
Version procedure: T6031G02_20DEC2005_05DEC05ABR
Target CPU: UNSPECIFIED
AXCEL timestamp: 05DEC2005 05:59:09
Privileged code: YES
\bitty $DSMSCM.ZDSMSCM 7> vproc cbexe
VPROC - T9617H01 - (01 OCT 2004) SYSTEM \BITTY Date 25 AUG 2005, 15:14:35
Copyright 2004 Hewlett-Packard Development Company, L.P.
STARTSCM: A new version of DSM/SCM has been installed and IPM6031 needs to
be run. You can either exit and run IPM6031
manually or continue and IPM6031 will be run for you.
Enter <CR> to continue or BREAK to exit.