G06.32 Software Installation and Upgrade Guide

Overview of Installing G06.32

G06.32 Software Installation and Upgrade Guide—546068-002

1-12

Updating Firmware

You must use OSM to update firmware for products not supported by TSM, such as the

6780 ServerNet Switch, IOAM MEs, FCSA, G4SA, and Fibre Channel disks. For

information on using OSM to update firmware, see the OSM online help.

Table 1-1 lists the updateable firmware for processors, SPs, and SCSI SACs.

Note. SP firmware T1089ABP or later is required to attach a NonStop S-series I/O enclosure

to the HP Integrity NonStop NS-series system. See Scout for the most recent T1089 SPR.To

connect an IOAM enclosure to a NonStop S-series system in a group other than group 01, you

must ensure that T1089ABR or later is installed. When using the Low-Level Link application to

update T1089, you must use FTP to transfer the file SPNTCDE9 from the host to the PC.

Other interoperability SPRs (FCSA, G4SA) might also need to be installed before attaching an

IOMF2 CRU to an Integrity NonStop NS-series system. See Table 1-1

on page 1-12, Table 1-2

on page 1-14, and the IUG2 for more information.

Connecting an S-series system to a BladeSystem is not supported.

Table 1-1. G06.32 Updateable Firmware for Processors, SPs, and SCSI SACs

Product

Number Description

Host

CRU/FRU

Disk File

Name

Default

Location Tool

Informatio

T0503AAB SCSI boot

code

PMF and

PMF 2

IBOOT SYS

subvolume

TSM SA

and LLL

OSM SC

Section 12,

Loading the

G06.32

RVU; TSM

or OSM

online help