G06.32 Software Installation and Upgrade Guide

Contents

G06.32 Software Installation and Upgrade Guide—546068-002

4. Installing SPRs Before Upgrading to the G06.32

RVU (continued)

4. Installing SPRs Before Upgrading to the G06.32

RVU (continued)

OSM Server and Client Compatibility SPRs 4-13

Determining the Current Version of the OSM Service Connection 4-13

Configuring OSM Server Settings 4-14

TSM Server and Client Compatibility SPRs

4-14

Determining the Current Version of TSM Server Software

4-15

5. Preparing to Upgrade the Server Software

Save the Current Configuration File (CONFxxyy) 5-1

Upgrade the System Console Software 5-2

Verify System Operations 5-3

Check Processor Status (Using Either TSM or OSM)

5-4

Check System Enclosure Components (Using TSM)

5-6

Check Processor Status (Using OSM) 5-8

Check Critical System Processes 5-12

Check the Status of the SACs 5-13

Check Disk Subsystem Status 5-13

Check the Swap File Configuration 5-14

Check the Status of the Spooler Collector 5-16

Check the Tape Drive Status 5-16

Check Products With Possible Regressions 5-16

Record the Current SYS

5-17

Back Up Important Files 5-17

6. Installing the G06.32 RVU

Alerts 6-1

Back Up Important Files

6-2

Receive New Software Into the Archive

6-3

Create a New Software Revision 6-8

Build and Apply the New Software Revision 6-13

Print Operator Instructions From the Target Interface (ZPHITI) 6-19

Recovery for Problems Installing the G06.32 RVU 6-22

Cancel Pending Build/Apply Requests 6-22

7. Replacing the Disk Microcode (Pre-G06.06 RVU)