G06.32 Software Installation and Upgrade Guide

Contents

G06.32 Software Installation and Upgrade Guide—546068-002

9. Updating Processor Boot Code (continued)

Method 2: Using Your Current Pre-G06.24 OSM or TSM SPRs, Update the Processor

Boot Code and Issue a Reset Action or Equivalent 9-10

Using TSM, Update the Processor Boot Code and Issue a Reset Action or

Equivalent 9-10

Using OSM, Update the Processor Boot Code and Issue a Reset or

Equivalent 9-14

Reset the Processors To Complete Updating the Processor Boot Code (Both for

OSM and TSM) 9-16

10. Updating SCSI Boot Code

(Pre-G06.08 RVU)

SCSI Boot Code Product Numbers 10-1

Using TSM to Update SCSI Boot Code (If Necessary)

10-2

Using OSM to Update SCSI Boot Code (If Necessary) 10-4

11. Running ZPHIRNM

Alerts 11-1

Back Up (Copy) Files in the $SYSTEM.ZTCPIP Subvolume 11-2

Stop All Applications 11-3

Drain the Spooler 11-3

Back Up the Spooler Control Files 11-4

ZPHIRNM 11-4

Using ZPHIRNM PREVIEW Mode 11-4

Steps for Running ZPHIRNM 11-5

Verify That ZPHIRNM Ran Successfully 11-9

12. Loading the G06.32 RVU

Alerts 12-1

Halt the Processors

12-2

Replace Processor or Other System CRUs 12-3

System Load Using the TSM or OSM

Low-Level Link 12-4

Reload the Remaining Processors (If Necessary) 12-6

Check the Status of the Processors

12-7

Recovery Operations for System Load

12-7

Performing a System Load From the Mirror System Disk

12-7

The Reset Operation 12-8