G06.32 Software Installation and Upgrade Guide

Contents

G06.32 Software Installation and Upgrade Guide—546068-002

vii

13. Resuming Normal Operations

Update TCP/IP Configuration Files 13-1

Step 1: Copy the Sample TCP/IP Files Into $SYSTEM.ZTCPIP (Optional)

13-2

Step 2: Check the PROTOCOL File

13-3

Step 3: Ensure That PORTCONF and SERVICES Files Are Complete 13-3

Reconfigure System Console Applications 13-4

Using TSM to Reconfigure Primary and Backup Dial-Out Points 13-4

Using TSM to Reconfigure Your Site Contact Information 13-4

Using OSM (If Installed) to Reconfigure Site Contact Information and Backup Dial-

Out Points 13-4

Check Processor Status (Using TSM or OSM) 13-4

Perform Other Firmware Updates

13-5

Update SWAN and SWAN 2 CLIP Firmware

13-5

Update NonStop ServerNet Switch Firmware 13-5

Update ServerNet Adapter Firmware 13-5

Update ServerNet/FX and ServerNet/FX2 Firmware 13-6

Configure the Spooler 13-9

Start User and System Applications 13-10

Before Starting DSM/SCM 13-10

Start DSM/SCM 13-11

Reset and Start the Mirror System Disk (If Necessary) 13-11

Configure Specific Products (Post-System Load) 13-12

Configure Expand and New Profiles 13-12

Configure OSS 13-13

OSS Unautomated Configuration and Startup 13-14

Configure SMF (Optional)

13-15

Configure the Remote Database Facility (RDF) 13-15

Upgrade the WAN Manager (T8365) (Optional) 13-16

Upgrade the TNOS Server and TNOS Utility (Optional) 13-16

Configure Spooler Plus and Enform Plus 13-16