GDSX (Extended General Device Support) Manual

Operations and Support

Extended General Device Support (GDSX) Manual—529931-001

3-26

Fault Messages

These warning and error messages are handled by EMS. They appear at the EMS

terminal along with the EMS event messages.

A fault message may be generated by TSCODE or by a USCODE call to the FAULT

procedure. (See the procedure description in Section 8, Service Routines.) Table lists

the number ranges for fault messages.

All fault messages have the following format:

1041 Checkpoint failure

1042 Checkpoint open failure

1043 Create Backup failure

1044 Open Backup failure

1045 Write to Backup failure

1046 Backup deleted

1047 Backup abended

1048 Backup stopped

1049 Backup takeover

1050 Backup created

1051 Checkpoint exceeded

1052 Checkpoint overflow

1053 Internal error

1054 Disallowed for converted process

1055 Disallowed for unconverted process

Table 3-6. Number Ranges for Fault Messagesw

Number

Range Type of Messages

0-100 Reserved for faults detected by TSCODE

101-200 Warning type of faults detected by a DEVICE^HANDLER task

201-300 Error type of faults detected by a DEVICE^HANDLER task

301-400 Warning type of faults detected by a LINE^HANDLER task

401-500 Error type of faults detected by a LINE^HANDLER task

hh:mi:ss: mm/dd/yy name (cpu,pin) message-type - text

Table 3-5. GDSX EMS Event Message Summary (page 2 of 2)

EMS Message Number Description of the Event Reported