GDSX (Extended General Device Support) Manual

DEVICE^HANDLER Example, Running and

Managing

Extended General Device Support (GDSX) Manual—529931-001

4-13

Stopping the First Application and GDSX

At the SCF prompt, enter:

-> STOP SU

You should see the following message, indicating that the SU has an opener ($A1),

and therefore cannot be stopped:

-> GDS E00011 STOP failed: Object is currently active

Then issue the following command for the same subdevice:

-> ABORT SU

At the first application terminal, after the CPU number and PIN prompt, you should see

the message:

D^H TASK STOPPED

At a TACL prompt, enter:

> STATUS *, TERM

Requester process $A1 should not appear.

If you enter the following command at the SCF prompt:

-> INFO SU

you should see a message that the object does not exist.

Then enter:

-> STOP PROCESS $GDS!

-> EXIT

The GDSX process is stopped and you exit from SCF. You may need to use the Break

key to get a TACL prompt.

Confirm that the GDSX process is gone by entering:

> STATUS *, TERM

Clear the values set by the PARAMs commands:

> CLEAR ALL