GDSX Management Programming Manual

Commands and Responses
GDSX Management Programming Manual—529930-001
5-75
TRACE Command
ZCOM-TKN-OBJTYPE is present in every response record and is described in the
SPI Common Extensions Manual.
ZSPI-TKN-RETCODE
is described in the SPI Programming Manual. A value of this token that might occur
in response to the SWITCH command is the following:
•
2: ZGDS-ERR-OBJSTATE-INV
For descriptions of all GDSX error numbers and their associated error lists, refer to
Section 7, Error Numbers and Error Lists.
ZSPI-TKN-ERRLIST
is described in the SPI Programming Manual. The list ends with the token ZSPI-
TKN-ENDLIST.
ZSPI-TKN-CONTEXT
is described in the SPI Programming Manual.
Operational Notes
After execution of this command, the final summary state remains the same.
Only the CPU modifier is supported.
TRACE Command
The TRACE command initiates, modifies, or terminates trace mode on the designated
process object.
Command
ZCOM-CMD-TRACE
Object Type
ZCOM-OBJ-PROCESS