GDSX Management Programming Manual

Event Messages
GDSX Management Programming Manual—529930-001
6-34
Event Messages
ZEMS-TKN-EVENTNUMBER
contains the value ZGDS-EVT-BKUP-STOPPED (1048).
ZEMS-TKN-EMPHASIS
contains the value ZSPI-VAL-FALSE, indicating that this is not a critical event.
ZEMS-TKN-CONSOLE-PRINT
contains the value ZSPI-VAL-TRUE.
ZGDS-TKN-SEVERITY
contains the value ZGDS-VAL-SEV-WARN indicating that this event reports a
warning only. The process is still operational.
1049: ZGDS-EVT-BKUP-TAKEOVER
Cause. A GDS backup process took over from its primary process because the
primary process was stopped by an operator command, the primary process abended,
the primary processor failed, or an operator command initiated a primary switch.
Effect. The GDS backup process becomes the primary process.
Recovery. If the primary process abended, investigate the event log to determine
why.
If the primary processor failed, follow the recommended recovery procedure for a
processor failure. Otherwise, no corrective action is needed.
Event-Message Text
WARNING *1048* Backup Stopped