GDSX Manual

Operations and Support

Extended General Device Support (GDSX) Manual–134303

3-26

Fault Messages

These warning and error messages are handled by EMS. They appear at the EMS

terminal along with the EMS event messages.

A fault message may be generated by TSCODE or by a USCODE call to the FAULT

procedure. (See the procedure description in Section 8.) Table lists the number ranges

for fault messages.

All fault messages have the following format:

hh is hour

mi is minute

ss is second

mm is month

dd is day

yy is year

name is process name

Fault messages generated by converted GDSX processes always show the PIN with a

value of 255.

Here is an example of a fault message:

09:23:00 04/10/91 $GDSX (06,37) error - TERM 01

($GDSX.#T27B)

Fault # 104 P =

%00.047502

Table 3-7 contains a summary of the fault messages issued by TSCODE. Fault numbers

0-4 and 10-13 are usually generated by the GDSX trap handler.

Table 3-6. Number Ranges for Fault Messagesw

Number

Range Type of Messages

0-100 Reserved for faults detected by TSCODE

101-200 Warning type of faults detected by a DEVICE^HANDLER task

201-300 Error type of faults detected by a DEVICE^HANDLER task

301-400 Warning type of faults detected by a LINE^HANDLER task

401-500 Error type of faults detected by a LINE^HANDLER task

hh:mi:ss: mm/dd/yy name (cpu,pin) message-type - text