Gigabit Ethernet 4-Port Adapter Installation and Support Guide

Gigabit Ethernet 4-Port ServerNet Adapter Installation and Support Guide—528166-006
ix
About This Guide
This guide describes how to install, replace, and relocate a Gigabit Ethernet 4-port
ServerNet adapter (G4SA) in an I/O adapter module (IOAM) enclosure.
Who Should Use This Guide
This guide is written for anyone who installs or maintains G4SAs in an IOAM enclosure
in an Integrity NonStop NS-series system or Integrity NonStop BladeSystem and
assumes knowledge of the:
•
OSM Service Connection. For more information about the OSM Service
Connection, see the OSM User’s Guide or the online help within the OSM Service
Connection.
•
ServerNet LAN Systems Access (SLSA) subsystem.
What’s in This Guide
Where to Get More Planning Information
Planning guides for NonStop systems are organized by system series and include:
•
NonStop S-Series Planning and Configuration Guide which describes all
NonStop S-series systems and associated components
•
NonStop NS-Series system planning guides which describe each
NonStop NS-series system (for example, the Integrity NonStop NS1000 Planning
Guide, the Integrity NonStop NS1200 Planning Guide, and so on).
Table i. Summary of Contents
Section Title This section. . .
1
Introduction to the Gigabit
Ethernet 4-Port ServerNet
Adapter (G4SA)
Describes the G4SA and its relationship to the
SLSA subsystem.
2
Installing a G4SA Describes how to install a G4SA.
3
Replacing a G4SA Describes how to remove and replace a G4SA.
4
Relocating a G4SA Describes how to remove and relocate a G4SA.
A
G4SA Planning and
Configuration Forms
Provides a blank configuration form for
recording G4SA configuration information.
B
Preparing a G4SA for
Processor Replacement
Describes how to verify a G4SA’s fault
tolerance before replacing a PMF or IOMF
CRU.
Glossary
Glossary Describes the technical terms and abbreviations
used in this guide.